HP 6125G Command Reference Manual page 94

Layer 3 - ip services command reference
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

Examples
# Display statistics of TCP traffic.
<Sysname> display tcp statistics
Received packets:
Total: 8457
packets in sequence: 3660 (5272 bytes)
window probe packets: 0, window update packets: 0
checksum error: 0, offset error: 0, short error: 0
duplicate packets: 1 (8 bytes), partially duplicate packets: 0 (0 bytes)
out-of-order packets: 17 (0 bytes)
packets of data after window: 0 (0 bytes)
packets received after close: 0
ACK packets: 4625 (141989 bytes)
duplicate ACK packets: 1702, too much ACK packets: 0
Sent packets:
Total: 6726
urgent packets: 0
control packets: 21 (including 0 RST)
window probe packets: 0, window update packets: 0
data packets: 6484 (141984 bytes) data packets retransmitted: 0 (0 bytes)
ACK-only packets: 221 (177 delayed)
Retransmitted timeout: 0, connections dropped in retransmitted timeout: 0
Keepalive timeout: 1682, keepalive probe: 1682, Keepalive timeout, so connections
disconnected : 0
Initiated connections: 0, accepted connections: 22, established connections: 22
Closed connections: 49 (dropped: 0, initiated dropped: 0)
Packets dropped with MD5 authentication: 0
Packets permitted with MD5 authentication: 0
Table 21 Command output
Field
Received
packets:
Total
packets in sequence
window probe packets
window update packets
checksum error
offset error
short error
duplicate packets
partially duplicate packets
Description
Total number of packets received.
Number of packets arriving in sequence.
Number of window probe packets received.
Number of window update packets received.
Number of checksum error packets received.
Number of offset error packets received.
Number of received packets with length being too small.
Number of completely duplicate packets received.
Number of partially duplicate packets received.
87

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents