HP 6125G Command Reference Manual page 107
Layer 3 - ip services command reference
Hide thumbs
Also See for 6125G:
- Command reference manual (426 pages) ,
- Configuration manual (379 pages) ,
- Release note (60 pages)
Table of Contents
Advertisement
Description
Use udp-helper server to specify the destination server to which UDP packets are forwarded.
Use undo udp-helper server to remove the destination server.
No destination server is configured by default.
You can configure up to 20 destination servers on an interface.
Without the ip-address argument, the undo udp-helper server command removes all the destination
servers on an interface.
Related commands: display udp-helper server.
Examples
# Specify the IP address of the destination server in the public network as 192.1.1.2 on the VLAN-interface
100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] udp-helper server 192.1.1.2
100
Advertisement
Table of Contents
