HP 6125G Command Reference Manual page 49

Default level
1: Monitor level
Parameters
group-id: Specifies a server group by its number, in the range of 0 to 19, about display DHCP packet
statistics is to be displayed.
all: Specifies all server groups about which DHCP packet statistics is to be displayed. Information for
each group is displayed independently.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display dhcp relay statistics to display DHCP packet statistics related to a specified DHCP server
group or all DHCP server groups.
If no parameter (server-group and all) is specified, all DHCP packet statistics on the relay agent will be
displayed.
Related commands: reset dhcp relay statistics.
Examples
# Display all DHCP packet statistics on the relay agent.
<Sysname> display dhcp relay statistics
Bad packets received:
DHCP packets received from clients:
DHCPDISCOVER packets received:
DHCPREQUEST packets received:
DHCPINFORM packets received:
DHCPRELEASE packets received:
DHCPDECLINE packets received:
BOOTPREQUEST packets received:
DHCP packets received from servers:
DHCPOFFER packets received:
DHCPACK packets received:
DHCPNAK packets received:
BOOTPREPLY packets received:
DHCP packets relayed to servers:
DHCPDISCOVER packets relayed:
DHCPREQUEST packets relayed:
DHCPINFORM packets relayed:
DHCPRELEASE packets relayed:
DHCPDECLINE packets relayed:
BOOTPREQUEST packets relayed:
DHCP packets relayed to clients:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
42