HP 6125G Command Reference Manual page 11

View
Any view
Default level
1: Monitor level
Parameters
all: Displays all ARP entries.
dynamic: Displays dynamic ARP entries.
static: Displays static ARP entries.
slot slot-number: Displays the ARP entries on a specified IRF member switch. The slot-number argument
specifies the ID of an IRF member switch. The value range for the argument depends on the number of
member switches and their member IDs in the IRF fabric, which you can display with the display irf
command. On a standalone device, the slot-number argument specifies the ID of the device.
vlan vlan-id: Displays the ARP entries of the specified VLAN. The VLAN ID ranges from 1 to 4094.
interface interface-type interface-number: Displays the ARP entries of the interface specified by the
argument interface-type interface-number.
count: Displays the number of ARP entries.
verbose: Displays detailed information about ARP entries.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression..
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display arp to display ARP entries in the ARP mapping table.
If no parameter is specified, all ARP entries are displayed.
Related commands: arp static and reset arp.
Examples
# Display the information of all ARP entries.
<Sysname> display arp all
IP Address
192.168.0.235
192.168.0.86
192.168.0.161
192.168.0.162
Table 1 Command output
Field
IP Address
Type: S-Static D-Dynamic
MAC Address VLAN ID
00e0-fc02-2181 1
00e0-fc00-7801 1
000f-e000-0003 1
00e0-fc14-000b 1
Description
IP address in an ARP entry.
Interface
GE1/0/30
GE1/0/30
GE1/0/30
GE1/0/30
4
Aging Type
20 D
9 D
20 D
20 D