Dhcp Relay Agent Configuration Commands; Dhcp Dscp; Dhcp Enable - HP 6125G Command Reference Manual

DHCP relay agent configuration commands

The DHCP relay agent configuration is supported only on VLAN interfaces.

dhcp dscp

Syntax
dhcp dscp dscp-value
undo dhcp dscp
View
System view
Default level
2: System level
Parameters
dscp-value: Specifies the DSCP value in DHCP packets, in the range of 0 to 63.
Description
Use dhcp dscp to set the DSCP value for DHCP packets sent by the DHCP relay agent.
Use undo dhcp dscp to restore the default.
By default, the DSCP value in DHCP packets sent by the DHCP relay agent is 56.
Examples
# Set the DSCP value to 30 for DHCP packets.
<Sysname> system-view
[Sysname] dhcp dscp 30

dhcp enable

Syntax
dhcp enable
undo dhcp enable
View
System view
Default level
2: System level
Parameters
None
Description
Use dhcp enable to enable DHCP.
23