HP 6125G Command Reference Manual page 112

ReasmOKs:
InFragDrops:
InFragTimeouts:
OutFragFails:
InUnknownProtos:
InDelivers:
OutRequests:
OutForwDatagrams:
InNoRoutes:
InTooBigErrors:
OutFragOKs:
OutFragCreates:
InMcastPkts:
InMcastNotMembers:
OutMcastPkts:
InAddrErrors:
InDiscards:
OutDiscards:
Table 25 Command output
Field
Vlan-interface2 current state
Line protocol current state
IPv6 is enabled
link-local address
Global unicast address(es)
valid lifetime
preferred lifetime
Joined group address(es)
MTU
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Description
Physical state of the interface:
•
Administratively DOWN—The VLAN interface is administratively
down. The interface is shut down by using the shutdown command.
•
DOWN—The VLAN interface is administratively up but its physical
state is down. No ports in the VLAN are up due to a connection or
link failure.
•
UP—The administrative and physical states of the VLAN interface are
both up.
Link layer protocol state of the interface:
•
DOWN—The link layer protocol state of the VLAN interface is down.
•
UP—The link layer protocol state of the VLAN interface is up.
IPv6 packet forwarding state of the interface. (After an IPv6 address is
configured for an interface, IPv6 is automatically enabled on it. IPv6
packet forwarding is enabled in the example.)
Link-local address configured for the interface.
Global unicast addresses configured for the interface.
Valid lifetime of the global unicast address obtained through stateless
autoconfiguration.
Preferred lifetime of the global unicast address obtained through
stateless autoconfiguration.
Addresses of multicast groups that the interface has joined.
Maximum transmission unit of the interface.
105