Display Tcp Ipv6 Status - HP 6125G Command Reference Manual

Field
keepalive probe
Keepalive timeout, so connections disconnected
Initiated connections
accepted connections
established connections
Closed connections
dropped
initiated dropped
Packets dropped with MD5 authentication
Packets permitted with MD5 authentication

display tcp ipv6 status

Syntax
display tcp ipv6 status [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display tcp ipv6 status to display the IPv6 TCP connection status, including the IPv6 TCP control block
address, local and peer IPv6 addresses, and status of the IPv6 TCP connection.
Examples
# Display the IPv6 TCP connection status.
<Sysname> display tcp ipv6 status
*: TCP6 MD5 Connection
TCP6CB
045d8074
Local Address
::->21
Description
Number of keepalive probes
Number of connections dropped because of keepalive
response timeout
Number of initiated connections
Number of accepted connections
Number of established connections
Number of closed connections
Number of dropped connections (after SYN is received
from the peer)
Number of initiated but dropped connections (before
SYN is received from the peer)
Number of packets that fail the MD5 authentication and
are dropped
Number of packets that pass the MD5 authentication
Foreign Address
::->0
119
State
Listening