Ipv6 Nd Ra Router-Lifetime; Ipv6 Neighbor - HP 6125G Command Reference Manual

<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 nd ra prefix 2001:10::100/64 100 10

ipv6 nd ra router-lifetime

Syntax
ipv6 nd ra router-lifetime value
undo ipv6 nd ra router-lifetime
View
Interface view
Default level
2: System level
Parameters
value: Specifies the router lifetime in seconds, in the range of 0 to 9000. When it is set to 0, the device
does not serve as the default router.
Description
Use ipv6 nd ra router-lifetime to configure the router lifetime in RA messages.
Use undo ipv6 nd ra router-lifetime to restore the default.
By default, the router lifetime in RA messages is 1800 seconds.
The router lifetime in RA messages should be greater than or equal to the advertising interval.
Examples
# Set the router lifetime in RA messages on VLAN-interface 100 to 1000 seconds.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 nd ra router-lifetime 1000

ipv6 neighbor

Syntax
ipv6 neighbor ipv6-address mac-address { vlan-id port-type port-number | interface interface-type
interface-number }
undo ipv6 neighbor ipv6-address interface-type interface-number
undo ipv6 neighbor ipv6-address mac-address { vlan-id port-type port-number | interface interface-type
interface-number }
View
System view
Default level
2: System level
Parameters
ipv6-address: Specifies the IPv6 address of the static neighbor entry.
134