HP 6125G Command Reference Manual page 96

Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display udp statistics to display statistics of UDP packets.
Related commands: reset udp statistics.
Examples
# Display statistics of UDP packets.
<Sysname> display udp statistics
Received packets:
Total: 0
checksum error: 0
shorter than header: 0, data length larger than packet: 0
unicast(no socket on port): 0
broadcast/multicast(no socket on port): 0
not delivered, input socket full: 0
input packets missing pcb cache: 0
Sent packets:
Total: 0
Table 22 Command output
Field
Received
packets:
Sent packets:
Total
checksum error
shorter than header
data length larger than packet
unicast(no socket on port)
broadcast/multicast(no socket on
port)
not delivered, input socket full
input packets missing pcb cache
Total
Description
Total number of UDP packets received
Total number of packets with incorrect checksum
Number of packets with data shorter than head
Number of packets with data longer than packet
Number of unicast packets with no socket on port
Number of broadcast/multicast packets without socket
on port
Number of packets not delivered to an upper layer due to
a full socket cache
Number of packets without matching protocol control
block (PCB) cache
Total number of UDP packets sent
89