Ipv6 Nd Autoconfig Other-Flag - HP 6125G Command Reference Manual

View
Interface view
Default level
2: System level
Parameters
None
Description
Use ipv6 nd autoconfig managed-address-flag to set the managed address configuration (M) flag to 1
so that the host can acquire an IPv6 address through stateful autoconfiguration (for example, from a
DHCP server).
Use undo ipv6 nd autoconfig managed-address-flag to restore the default.
By default, the M flag is set to 0 so that the host can acquire an IPv6 address through stateless
autoconfiguration.
Examples
# Configure the host to acquire an IPv6 address through stateful autoconfiguration.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 nd autoconfig managed-address-flag

ipv6 nd autoconfig other-flag

Syntax
ipv6 nd autoconfig other-flag
undo ipv6 nd autoconfig other-flag
View
Interface view
Default level
2: System level
Parameters
None
Description
Use ipv6 nd autoconfig other-flag to set the other stateful configuration flag (O) to 1 so that the host can
acquire information other than IPv6 address through stateful autoconfiguration (for example, from a
DHCP server).
Use undo ipv6 nd autoconfig other-flag to restore the default.
By default, the O flag is set to 0 so that the host can acquire other information through stateless
autoconfiguration.
Examples
# Configure the host to acquire information other than IPv6 address through stateless autoconfiguration.
<Sysname> system-view
[Sysname] interface vlan-interface 100
128