HP 6125G Command Reference Manual page 81

Use display link-aggregation verbose to display information about all aggregation groups.
The bridge-aggregation keyword is available only when you create Layer 2 aggregate interfaces on the
device.
Examples
# Display detailed information about the aggregation group corresponding to Layer 2 aggregate
interface Bridge-Aggregation 1, which is a dynamic aggregation group.
<Sysname> display link-aggregation verbose bridge-aggregation 1
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregation Interface: Bridge-Aggregation1
Aggregation Mode: Dynamic
Loadsharing Type: Shar
System ID: 0x8000, 000f-e267-6c6a
Local:
Port
-------------------------------------------------------------------------------
GE1/0/26
GE1/0/32
Remote:
Actor
-------------------------------------------------------------------------------
GE1/0/26
GE1/0/32
# Display detailed information about the aggregation group corresponding to Layer 2 aggregate
interface Bridge-Aggregation 2, which is a static aggregation group.
<Sysname> display link-aggregation verbose bridge-aggregation 2
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregation Interface: Bridge-Aggregation2
Aggregation Mode: Static
Loadsharing Type: NonS
Port
--------------------------------------------------------------------------------
GE1/0/21
GE1/0/22
GE1/0/23
Status Priority Oper-Key
S 32768
S 32768
Partner Priority Oper-Key
32 32768
26 32768
Status Priority
U 32768
U 32768
U 63
Flag
2 {ACDEF}
2 {ACDEF}
SystemID
2 0x8000, 000f-e267-57ad {ACDEF}
2 0x8000, 000f-e267-57ad {ACDEF}
Oper-Key
1
1
1
73
Flag