Display Voice Vlan State - HP 6125G Command Reference Manual

Field
Mask
Description

display voice vlan state

Syntax
display voice vlan state [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display voice vlan state to display voice VLAN configuration.
Related commands: voice vlan enable, voice vlan qos, and voice vlan qos trust.
Examples
# Display voice VLAN configurations.
<Sysname> display voice vlan state
Maximum of Voice VLANs: 128
Current Voice VLANs: 1
Voice VLAN security mode: Security
Voice VLAN aging time: 1440 minutes
Voice VLAN enabled port and its mode:
PORT
--------------------------------------------------------------------
GigabitEthernet1/0/11
Table 42 Command output
Field
Maximum of Voice VLANs
Current Voice VLANs
Description
Masks of the OUI addresses supported
Description strings of the OUI addresses supported
VLAN MODE
111 AUTO
Description
Maximum number of voice VLANs supported by the system.
Number of existing voice VLANs.
175
COS DSCP
6 46