HP 6125G Command Reference Manual page 78

G -- Defaulted, H -- Expired
GigabitEthernet1/0/2:
Aggregation Interface: Bridge-Aggregation2
Local:
Port Number: 7
Port Priority: 32768
Oper-Key: 3
Flag: {ACG}
Remote:
System ID: 0x8000, 0000-0000-0000
Port Number: 0
Port Priority: 32768
Oper-Key: 0
Flag: {EF}
Received LACP Packets: 0 packet(s)
Illegal: 0 packet(s)
Sent LACP Packets: 0 packet(s)
Table 18 Command output
Field
Flags
Aggregation Interface
Local
Port Priority
Oper-key
Flag
Remote
System ID
Received LACP Packets
Illegal
Sent LACP Packets
Description
LACP state flags:
•
A—LACP is enabled.
•
B—Indicates the LACP short timeout.
•
C—The sending system detects that the link is aggregatable.
•
D—The sending system detects that the link is synchronized.
•
E—The sending system detects that the incoming frames are collected.
•
F—The sending system detects that the outgoing frames are distributed.
•
G—The sending system receives frames in the default state.
•
H—The sending system receives frames in the expired state.
Aggregate interface to which the member port belongs.
Information about the local end.
Aggregation priority of the port.
Operational key.
LACP protocol state flag.
Information about the remote end.
Remote end system ID, comprising the system LACP priority and the system MAC
address.
Total number of LACP packets received.
Total number of illegal packets.
Total number of LACP packets sent.
70