Lldp Timer Tx-Interval - HP 6125G Command Reference Manual

View
System view
Default level
2: System level
Parameters
delay: Sets the LLDPDU transmit delay, ranging from 1 to 8192 seconds.
Description
Use lldp timer tx-delay to set the LLDPDU transmit delay.
Use undo lldp timer tx-delay to restore the default.
By default, the LLDPDU transmit delay is 2 seconds.
It is a good practice to set the LLDPDU transmit delay to be no greater than a quarter of the LLDPDU
transmit interval.
If the LLDPDU transmit delay is greater than the LLDPDU transmit interval, the device uses the LLDPDUs
transmit delay as the transmit interval.
Related commands: lldp timer tx-interval.
Examples
# Set the LLDPDU transmit delay to 4 seconds.
<Sysname> system-view
[Sysname] lldp timer tx-delay 4

lldp timer tx-interval

Syntax
lldp timer tx-interval interval
undo lldp timer tx-interval
View
System view
Default level
2: System level
Parameters
interval: Sets the LLDPDU transmit interval, ranging from 5 to 32768 seconds.
Description
Use lldp timer tx-interval to set the LLDPDU transmit interval.
Use undo lldp timer tx-interval to restore the default.
By default, the LLDPDU transmit interval is 30 seconds.
It is a good practice to set the LLDPDU transmit interval to be no less than four times the LLDPDU transmit
delay.
If the LLDPDU transmit interval is less than the LLDPDU transmit delay, the device uses the LLDPDUs
transmit delay as the transmit interval.
223