stp region-configuration
Syntax
stp region-configuration
undo stp region-configuration
View
System view
Default level
2: System level
Parameters
None
Description
Use stp region-configuration to enter MST region view.
Use undo stp region-configuration to restore the default MST region configurations.
These are the default settings for the MST region:
The MST region name of the device is the MAC address of the device.
•
•
All VLANs are mapped to the CIST.
The MSTP revision level is 0.
•
After you enter MST region view, you can configure the MST region-related parameters, including the
region name, VLAN-to-instance mappings, and revision level.
Examples
# Enter MST region view.
<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region]
stp root primary
Syntax
stp [ instance instance-id ] root primary
undo stp [ instance instance-id ] root
View
System view
Default level
2: System level
Parameters
instance instance-id: Configures the device as the root bridge in a particular MSTI. The value of
instance-id ranges from 0 to 32, where 0 represents the CIST.
119