Port Hybrid Ip-Subnet-Vlan - HP 6125G Command Reference Manual

port hybrid ip-subnet-vlan

Syntax
port hybrid ip-subnet-vlan vlan vlan-id
undo port hybrid ip-subnet-vlan { vlan vlan-id | all }
View
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Default level
2: System level
Parameters
vlan vlan-id: Specifies a VLAN ID, in the range of 1 to 4094.
all: Specifies all VLANs.
Description
Use port hybrid ip-subnet-vlan to associate the Ethernet port with the specified IP subnet-based VLAN.
Use undo port hybrid ip-subnet-vlan to remove the association.
On an Ethernet port associated with an IP subnet-based VLAN, if the source IP address of a received
untagged packet belongs to the corresponding IP subnet, the port tags the packet with the corresponding
VLAN tag.
The configuration made in Layer 2 Ethernet interface view applies only to the port.
The configuration made in Layer 2 aggregate interface view applies to the aggregate interface and its
aggregation member ports.
If the system fails to apply the configuration to the aggregate interface, it stops applying the
•
configuration to aggregation member ports.
If the system fails to apply the configuration to an aggregation member port, it skips the port and
•
moves to the next member port.
Only hybrid ports support this feature. Before you use this command, assign the port to the IP
subnet-based VLAN you want to associate with.
Related commands: display ip-subnet-vlan interface.
Examples
# Associate GigabitEthernet 1/0/1 with the IP subnet-based VLAN 3.
<Sysname> system-view
[Sysname] vlan 3
[Sysname-vlan3] ip-subnet-vlan ip 192.168.1.0 255.255.255.0
[Sysname-vlan3] quit
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] port link-type hybrid
[Sysname-GigabitEthernet1/0/1] port hybrid vlan 3 untagged
Please wait... Done.
[Sysname-GigabitEthernet1/0/1] port hybrid ip-subnet-vlan vlan 3
# Associate the hybrid Layer 2 aggregate interface Bridge-Aggregation 1 with the IP subnet-based VLAN
3.
164