HP 6125G Command Reference Manual page 214

Port and protocol VLAN ID(PPVID) : 1
Port and protocol VLAN supported : Yes
Port and protocol VLAN enabled
VLAN name of VLAN 1: VLAN 0001
Auto-negotiation supported : Yes
Auto-negotiation enabled
OperMau
Power port class
PSE power supported
PSE power enabled
PSE pairs control ability : No
Power pairs
Port power classification : Class 0
Link aggregation supported : Yes
Link aggregation enabled
Aggregation port ID
Maximum frame Size: 1536
# Display the LLDP information sent from all neighboring devices in a list.
<Sysname> display lldp neighbor-information list
System Name
System1
System2
System3
Table 48 Command output
Field
LLDP neighbor-information of port 1
Neighbor index
Update time
Chassis type
Chassis ID
: No
: Yes
: speed(1000)/duplex(Full)
: PD
: No
: No
: Signal
: No
: 0
Local Interface Chassis ID
GE1/0/1 000f-e25d-ee91 GigabitEthernet1/0/5
GE1/0/2 000f-e25d-ee92 GigabitEthernet1/0/6
GE1/0/3 000f-e25d-ee93 GigabitEthernet1/0/7
Description
LLDP information received through port 1.
Index of the LLDP neighboring device.
Last time when LLDP information about a neighboring device was
updated.
Chassis ID type of the LLDP neighboring device:
•
Chassis component
•
Interface alias
•
Port component
•
MAC address
•
Network address (the IP address type, such as ipv4)
•
Interface name
•
Locally assigned—Local configuration
Chassis ID of the LLDP neighboring device, whose value type is the
chassis ID type.
206
Port ID