Stp Tc-Protection Threshold; Stp Tc-Snooping - HP 6125G Command Reference Manual

Description
Use stp tc-protection enable to enable the TC-BPDU attack guard function for the device.
Use stp tc-protection disable to disable the TC-BPDU attack guard function for the device.
By default, the TC-BPDU attack guard function is enabled.
Examples
# Disable the TC-BPDU attack guard function for the device.
<Sysname> system-view
[Sysname] stp tc-protection disable

stp tc-protection threshold

Syntax
stp tc-protection threshold number
undo stp tc-protection threshold
View
System view
Default level
2: System level
Parameters
number: Sets the maximum number of immediate forwarding address entry flushes that the device can
perform within a certain period of time (10 seconds). The value ranges from 1 to 255.
Description
Use stp tc-protection threshold to configure the maximum number of forwarding address entry flushes
that the device can perform every a certain period of time (10 seconds).
Use undo stp tc-protection threshold to restore the default.
By default, the device can perform a maximum of six forwarding address entry flushes every 10 seconds.
Examples
# Configure the device to perform up to 10 forwarding address entry flushes every 10 seconds.
<Sysname> system-view
[Sysname] stp tc-protection threshold 10

stp tc-snooping

Syntax
stp tc-snooping
undo stp tc-snooping
View
System view
Default level
2: System level
122