display link-aggregation summary
Syntax
display link-aggregation summary [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display link-aggregation summary to display the summary information for all aggregation groups.
The information about the remote system for a static link aggregation group may be displayed as none
or may not be displayed, because the aggregation group is not aware of the partner's information.
Examples
# Display the summary information for all aggregation groups.
<Sysname> display link-aggregation summary
Aggregation Interface Type:
BAGG -- Bridge-Aggregation, RAGG -- Route-Aggregation
Aggregation Mode: S -- Static, D -- Dynamic
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor System ID: 0x8000, 000f-e267-6c6a
AGG
Interface
-------------------------------------------------------------------------
BAGG1
BAGG10
Table 19 Command output
Field
Aggregation Interface Type
Aggregation Mode
AGG
Partner ID
Mode
S
none
D
0x8000, 000f-e267-57ad
Select Unselect
Ports
1
2
Description
Aggregate interface type:
•
BAGG—Layer 2 aggregate interface.
•
RAGG—Layer 3 aggregate interface.
Aggregation group type:
•
S—Static link aggregation.
•
D—Dynamic aggregation.
71
Share
Ports
Type
0
Shar
0
Shar