Destination MAC address
•
•
Source IP address and destination IP address
Source MAC address and destination MAC address
•
In Layer 2 aggregate interface view, the switch supports the following load sharing criteria and
combinations:
Load-sharing criteria automatically determined based on the packet type
•
Source IP address
•
•
Destination IP address
Source MAC address
•
Destination MAC address
•
Destination IP address and source IP address
•
Destination MAC address and source MAC address
•
Examples
# Configure the destination MAC address as the global link-aggregation load sharing criterion.
<Sysname> system-view
[Sysname] link-aggregation load-sharing mode destination-mac
# Configure the destination MAC address as the load sharing criterion specific to the link aggregation
group of aggregate interface Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] link-aggregation load-sharing mode destination-mac
link-aggregation load-sharing mode local-first
Syntax
link-aggregation load-sharing mode local-first
undo link-aggregation load-sharing mode local-first
View
System view
Default level
2: System level
Parameters
None
Description
Use link-aggregation load-sharing mode local-first to enable local-first load sharing for link
aggregation.
Use undo link-aggregation load-sharing mode local-first to disable local-first load sharing for link
aggregation.
By default, local-first load sharing is enabled for link aggregation.
Examples
# Disable local-first load sharing for link aggregation.
78