Display Mac-Vlan Interface - HP 6125G Command Reference Manual

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display mac-vlan to display the specified MAC address-to-VLAN entries.
If mac-address mac-address is specified but mask is not specified, only the MAC address-to-VLAN entry
containing the specified MAC address is displayed.
Examples
# Display all the MAC address-to-VLAN entries.
<Sysname> display mac-vlan all
The following MAC-VLAN address exist:
S: Static
MAC ADDR
-------------------------------------------------------------------
0008-0001-0000
0002-0001-0000
Total MAC VLAN address count:2
Table 35 Command output
Field
S: Static
D: Dynamic
MAC ADDR
MASK
VLAN ID
PRIO
STATE

display mac-vlan interface

Syntax
display mac-vlan interface [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
D: Dynamic
MASK
FFFF-FF00-0000
FFFF-FFFF-FFFF
Description
The character S stands for the MAC address-to-VLAN entries that are
configured statically.
The character D stands for the MAC address-to-VLAN entries that are
configured dynamically.
MAC address of a MAC address-to-VLAN entry.
Mask of the MAC address of a MAC address-to-VLAN entry.
VLAN ID of a MAC address-to-VLAN entry.
802.1p priority corresponding to the MAC address of a MAC
address-to-VLAN entry
State of a MAC address-to-VLAN entry:
•
S—The MAC address-to-VLAN entry is configured statically.
•
D—The MAC address-to-VLAN entry is configured automatically through
the authentication server.
•
S&D—The MAC address-to-VLAN entry is configured both statically and
dynamically.
VLAN ID PRIO
5 3
5 3
151
STATE
S
S&D