When Installing And Relocating The Printer; Power Specifications; Power Cords - Ricoh DDP 184 User Manual

When Installing and Relocating the Printer

Power Specifications

Power Cords

WARNING!
Connect the power plug only to a properly rated power outlet. Otherwise,
a fire or shock hazard may result.
Never use multi-plug adaptors to plug multiple power plugs into the same
power source. Be sure to operate the printer on a sole-use receptacle.
Multiple connectors can cause overheating and a fire could result.
Ensure that the plug connection is free of dust. In a damp environment, a contaminated
connector can draw a non-negligible amount of current that can generate heat and
eventually cause a fire over an extended period of time.
To prevent the risk of electric shocks and personal injury, fire, and printer damage:
Always use the power cord provided with your printer. When an extension power
cord is required, always use a properly rated cord.
If the power cord is not provided, use the following types of power cords:
r
For North America:
3 wires, Type SJT 3x14 AWG (3x1.33 mm
Rated min. 250V/12A (with grounding plug, NEMA 6-15P).
r
For Europe
3 wires, min. 3x1.5 mm
Harmonized (<HAR>), Rated min. 250V/12A (with grounding plug).
WARNING!
The printer must be connected to the grounding power outlet for safe and
proper operation.
Apparatet må kun tilkoples jordet stikkontakt.
Apparaten skall ansulatas till jordat uttag när den ansluts till ett nätverk.
Für einen sicheren und ordnungsgemäßen Betrieb muß der Drucker an
eine geerdete Steckdose angeschlossen werden.
Do not attempt to rework, pull, bend, chafe, or otherwise damage the power cord.
Do not place a heavy object on the cord.
Never touch a power cord with wet hands.
Rated Rated
Voltage Frequency
200-240V 50/60 Hz
2
Rated Current
Input 1: 12A
Input 2: 12A
2
) or thicker
Safety Information A-5