Ricoh DDP 184 User Manual page 66

3. Push down the paper tray.
4. Insert the paper onto the tray until it reaches the inner end of the tray.
)
:
NOTE
The paper should be loaded no higher than the Max. level indicator. The
Max. level indicator is located inside the tray.
When printing on pre-punched paper, refer to
page 3-17.
5. Select the paper size from the OCP by making the following selections:
Printer/Paper Source/Paper Size/MBT/Paper Size
6. If the paper size you choose is custom, see
Values" on page
3-14 Paper Handling
3-22.
"Loading Special Media" on
"Setting the Custom Paper Size