Setting the Default Tray
When a print job does not specify the paper source, the printer will use the default
setting. You set the default paper source as follows. From the OCP select:
Printer / Paper Source / Default / Tray
Setting the Paper Type
To set the paper type for each tray perform the following steps. From the OCP select:
Printer / Paper Source / Paper Type
Setting the Paper Color
To set the paper type for each tray perform the following steps. From the OCP select:
Printer / Paper Source / Paper Color
Setting the Paper Weight
To set the paper weight for each tray perform the following steps. From the OCP select:
Printer / Paper Source / Paper Weight
The paper weight adjustment screen is displayed.
1. Using the number pad, enter the value.
2. Select the unit of weight.
3. Press enter (
3-24
Paper Handling
<
).