Detach Voltage Adjustment
The Detach Voltage is sensitive to elevation, humidity, and paper type. The default
"
setting is
conditions at the installation site. E118, E119, E128, and E134 errors are an indication
that an adjustment is necessary.
The procedure for adjusting the detach voltage will depend on the software revision of
your printer. Early revisions do not support individual tray adjustment.To determine
which procedure to use perform the following steps:
Select Printer / Options /
If individual tray adjustment is not supported the following screen will be displayed:
If individual tray adjustment is supported, the following screen will be displayed:
6-54
Care and Maintenance
144"; however, it may be necessary to adjust the setting based on the
/ Detach Voltage / Front Engine