Ricoh DDP 184 User Manual page 143

Message
Sub Tray Cover Open
Close Cover
Sub Tray Paper Full
Remove Paper
Suspended Task
Switch Back Cover Open
Close Cover E045
Toner Collector Bottle Full
Replace Bottle E010
or E013
Toner Collector Not Set
Check Toner Bottle E01D
Toner Low
Add Toner
Toner Out
Supply Toner E011
Toner Unit Not Set
Check Toner Unit E036
Top Cover Open
Close Cover E042
Tray 1 Open
Close Tray E020
Tray 1, 2, or 3 Open
Tray 1, 2, or 3
Load xxx E090
Tray 1, 2, or 3
Load xxx
Tray 2 Open
Close Tray E021
Tray 3 Open
Close Tray E022
Tray x Active
Trimming Trash Box Full
Empty Box E028
Trimming Trash Box Not Set
Check Box
Trimming Unit Not Set
Check Unit
Upper Tray Cover Open
Close Cover E03E
Wait
Description
Self-explanatory.
Self-explanatory.
The printer may have a problem on
execution.
Self-explanatory.
Self-explanatory.
The toner collector bottle is not seated
properly.
Print quality will diminish until toner is
replenished.
The toner supply is empty
Self-explanatory
Self-explanatory.
Self-explanatory.
Self-explanatory.
The wrong paper size is loaded in the
tray.
The specified tray needs paper.
Self-explanatory.
Self-explanatory.
Displayed during printing.
The trimming trash box of the
Publishing Finisher is full.
The trimming trash box of the
Publishing Finisher is not seated
properly.
The trimming unit of the Publishing
Finisher is not seated properly.
Status message.
Corrective Action
Close the cover.
Remove the paper.
Cycle Power.
Close the switch back cover (on the
left side of the printer).
Replace the toner collector bottle.
Reseat the bottle.
Supply toner.
Supply toner.
Set the toner unit.
Close the guide.
Close the tray.
Close the tray.
Load the specified tray with the
requested paper size.
Load the specified tray with the
requested paper size.
Close the tray.
Close the tray.
Empty the box.
Reseat the box.
Reseat the trimming unit.
Wait for the printer to return to a Ready
state.
Troubleshooting 5-21