Ricoh DDP 184 User Manual page 46

Calendar - The following settings can be made:
r
Time Zone - See the following table for options.
r
Date - 0000/00/00 (Year/Month/Day)
r
Time - Set printer clock
Country Code
Select the appropriate country code used in international phone numbers. The
default setting is 1.
Energy Save Mode
When set to "Enable" the printer will go into energy save mode when there is no
printing or OCP activity for a specified period of time. There are two aspects to
energy save mode: heater-off mode which is set using Energy Save Time, and
sleep mode which turns off the power supply. The printer will not go into energy
save mode if a printer error occurs. Energy save mode is canceled under the
following conditions:
r
When the printer status line reads Online
r
When any key on the OCP is touched
r
When a setting is made from the Web Utilities
Energy Save Time
Use to set the time for heater-off mode. The range is 5 to 230 minutes. The default
time is 15 minutes. Sleep mode occurs automatically when the printer has been in
heater-off mode for 10 minutes.
Password
Use to change the System password. Contact your System Administrator.
Emulation
When Auto Select is selected, the host data is automatically identified. When PCL
is selected, the job is handled as a PCL job.
Public R/W
Enable allows read/write when SNMP community name is Public.
Sample Print
When set to "Enable" the OCP will display a "continue printing?" prompt after
completion of the first part of print data that is designated to print in two or more
parts. The default is "Disable".
2-18 Operator Control Panel