Adhesive Label Configuration; Storing Labels - Ricoh DDP 184 User Manual

Adhesive Label Configuration

The illustration on the left shows label stock with space between the individual labels.
This can cause paper jams and/or labels to peel off during the printing process. The
illustration on the right shows the recommended label stock without spaces between the
individual labels.
purchasing label stock.
Label
Label
Backing
Backing
Sheet
sheet
Not Recommended

Storing Labels

Store the labels in a clean, dry location where the temperature can be maintained
at 18° to 24°C (64° to 70°F) and the relative humidity does not exceed 55%.
Allow the labels to adjust to the printer room environment before opening the
label carton or package. Move the labels into the printer room at least 24 hours
prior to opening the carton or package.
Leave the labels in the original package until printing is ready to begin. Replace
the unused labels in the original package and then reseal the package with tape or
store the unused labels in a plastic bag.
Do not leave labels in the hopper of an inactive printer overnight or for long
periods of time.
Use the labels on a first-in, first-out basis.
C-12 Paper Specifications
Refer to "Adhesive Label Specifications" on page C-13
Not Recommended
Backing
Label
Backing
Label
Sheet Sheet
sheet
sheet
Recommended
Recommended
when