Using the + / - Change Button Menu
The image below is a sample of a menu with a + / - change button. It is used to increase
and decrease the OCP brightness and contrast. The current value is displayed to the
right of the icon.
Decrease -
Increase +
To increase or decrease the value,
1. Touch the + or - to adjust brightness or contrast. The numeric value and the
display will change immediately.
Touch the Enter/Accept button to activate setting.
:
NOTE
The setting will be ignored if the Enter/Accept button is not touched, or
if the Previous Menu button is touched prior to touching Enter/Accept.
2-6
Operator Control Panel
10
10
Current Value
Previous Menu
Enter/Accept