Setting The Tray Adjust Values - Ricoh DDP 184 User Manual

Setting the Tray Adjust Values

The tray adjust feature is used when it is necessary to shift the image on the printed
page. You can shift the image
you can set different tray adjust values for the front side and back side of the paper.
1. To display the Tray Adjust screen, make the following selections from the OCP:
Printer/Paper Source/
Front Side Adjust
Back Side Adjust
Paper Width
2. On the Tray Adjust screen, touch the left-most value box. The Tray Adjust Input
screen is displayed.
Ten Key Pad
3. Using the number pad, enter the value for the feed direction of the paper. A
positive value, (+0.25) moves the image right or up and a negative value (-0.25)
moves the image to the left or down on the printed page.
4. Press enter (
have entered is shown.
5. Touch the bottom-most value box. The display returns to Tray Adjust Input.
6. Using the number pad, enter the value for the scan direction of the paper. For
example, entering + 0.25 moves the image 0.25 in. to the top of the printed page.
7. Press enter (
values you have entered are displayed.
8. Press enter (
± 0.25 in. (
/Tray Adjust/tray number
<
). The display returns to the Tray Adjust screen and the value you
<
). The display returns to the Tray Adjust screen and now both
<
). Your tray adjust settings are now saved.
± 6.3 mm). When printing in duplex mode,
Enter or Accept
Enter or Accept
Paper Handling 3-23
Paper Length
Previous Menu
Previous Menu