Booklet Finisher Error Codes (Option) - Ricoh DDP 184 User Manual

Booklet Finisher Error Codes (Option)

When Invalid Booklet #xx or Invalid Folder #xx is displayed on the
OCP, cancel the job and remove any remaining paper. Refer to the applicable error code
in the table below for a description of the problem. Resubmit the job after taking the
appropriate corrective action.
Error Code
(#xx)
#01 Single sheet booklet required.
#02 Mixed paper sizes requested in booklet.
#03 Uncollated set booklet required.
Booklet
The print job is over 16 sheets or the thickness of the paper is over 1.7 mm.
#04
Folding
The print job is over 3 sheets or the thickness of the paper is over 0.3 mm.
#05 Face Up requested.
#10 Insert tray requested without Publishing Finisher present.
#11 Saddle Stitch requested without Publishing Finisher present.
#12 Invalid request for transparencies or labels in booklet.
#13 Invalid custom paper code requested for booklet.
#14 Unsupported paper code requested for booklet.
#15 Incorrect stacker requested for booklet (must be Booklet Stacker or AUTO).
#16 Incorrect stacker requested for Saddle Stitch booklet.
#17 Trimming requested without Booklet Stacker and Saddle Stitch.
#18 Tab Stock paper requested from an inserter tray.
The following paper sizes and weights can be used when creating a booklet to be
Saddle Stitched.
Paper Size:
A4 (SEF), B4 (SEF), A3 (SEF), Letter (SEF), Folio (SEF), Legal (SEF), Ledger (SEF),
and Custom Size.
Custom Size:
Leading Edge (Width): 8.27 inch (210.0 mm) to 12.0 inch (304.8 mm).
Side Edge (Length): 11inch (279.4 mm) to 17.5 inch (444.5 mm).
Paper Weight:
64 - 163 g/m
Bond: 17 - 43 lb.
Index: 35 - 90 lb.
2
Description
Troubleshooting 5-9