Status Options - Ricoh DDP 184 User Manual

Status Options

Each of the options available under Status are described in the following table. Access
to the Status options is not restricted by a password.
Option
Displays printer configuration and status. Displays information on the printer,
General
contact, language, printer location, printer name, and printer uptime.
Displays the size, type, and weight of the paper in each tray. Graphically displays
Tray
the amount of paper in each tray. Links to paper source setup pages.
Displays information on installed finishers. Depending on the finisher installed,
Finisher the status of elements such as cover, stacker, and staple cartridges may be
displayed.
Displays the status of the toner, developer mix, fuser web, fuser unit, and drum
Consumables
unit.
Errors Displays the error counts for the printer.
Displays paper usage information, toner coverage percentages, and
Usage preventative maintenance (PM) page counts. Displays page counts for all
available paper sizes, for the current period and the life of the printer.
Displays the MAC address, IP address, and subnet mask of the onboard network
Network controller. If installed, this information is displayed for the Network Interface Card
(NIC) as well.
Revision Displays revision information for the engine firmware and controller software.
Lists all available reports as links. Reports include Status, Summary, Demo, PCL
Reports Directory, PCL Fonts, PostScript Directory, and PostScript Fonts reports. Prints
the relevant report when the link is clicked.
Description
Web Utilities 4-5