Ricoh DDP 184 User Manual page 19

Key Component
1 Main Power Switch
2 Front Cover
3 Vertical Path Cover
4 Multi-bypass Tray (MBT)
5 Toner Supply Cover
6 Operator Control Panel (OCP)
7 Tray 1
8 Tray 2
9 Tray 3
10 Switch Back Cover
11 Elevator Tray
12 High Capacity Feeder (HCF)
13 HCF Top Cover
14 Toner Collector Bottle Cover
15 Finisher
16 Upper Tray
17 Inserter
1
18 Booklet Tray
19 Relay Unit Front Cover
20 Front Engine Switch
21 Rear Engine Switch (not shown)
:
NOTE
1 When Booklet Finisher is installed.
2 Front and Rear Engine power switch should remain on. Use Main Power
Switch to power the system on and off.
on page
Use to turn the system on and off.
Open to replace units, clear paper jams, or clean the inside of
the printer. (Front and Rear Printer)
Open to clear paper jams. (Front and Rear Printer)
Holds up to 150 sheets of paper. (Front Printer)
Open to replenish the toner supply. (Front and Rear Printer)
Displays printer status and menu information. (Front Printer)
Holds up to 2,000 sheets of paper. (Front Printer)
Holds up to 500 sheets of paper. (Front Printer)
Holds up to 500 sheets of paper. (Front Printer)
Open to clear paper jams.(Front and Rear Printer)
Output tray.
Holds up to 3,000 sheets of paper.
Open to clear paper jams.
Open to replace the toner collector bottle.(Front and Rear
Printer)
For stacking, job offset, and stapling.
Output tray.
Holds cover sheet or insert paper.
Output tray for the Booklet Finisher.
Open to clear paper jams.
2
Use to turn the front Engine on and off.
2
Use to turn the rear Engine on and off.
1-9.
Description
See "Powering On the Printer"
Printer Overview 1-5