Configuring The System Time By Using Ntp - HP 1910 User Manual

Figure 49 Calendar page
3. Enter the system date and time in the Time field, or select the date and time in the calendar. To set
the time on the calendar page, select one of the following methods:
Click Today. The date setting in the calendar is synchronized to the current local date
configuration, and the time setting does not change.
Select the year, month, date, and time, and then click OK.
4. Click Apply on the system time configuration page to save your configuration.

Configuring the system time by using NTP

1. Select Device > System Time from the navigation tree.
2. Click the Network Time Protocol tab.
The page for configuring the system time through NTP appears.
Figure 50 NTP configuration page
3. Configure the system time as described in
4. Click Apply.
Table 10.
63