HP 1910 User Manual page 454

Select Enable to use the domain as the default domain.
c. Click Apply.
Figure 423 Adding an ISP domain
# Configure the authentication method for the ISP domain.
a. Select Authentication > AAA from the navigation tree, and then click the Authentication tab.
b. Configure the following parameters, as shown in
Select the domain name test.
Select the Default AuthN box and then select RADIUS as the authentication mode.
Select system from the Name list to use it as the authentication scheme.
c. Click Apply.
A configuration progress dialog box appears, as shown in
d. After the configuration process is complete, click Close.
Figure 424 Configuring the authentication method for the ISP domain
Figure 424.
441
Figure 425.