Displaying The Ipv6 Active Route Table - HP 1910 User Manual

Hp 1910 gigabit ethernet switch series

Hide thumbs Also See for 1910:

Table of Contents

Displaying the IPv6 active route table

Select Network > IPv6 Routing from the navigation tree to enter the page.

Figure 270 IPv6 active route table

Table 92 Field description

Destination IP Address

Prefix Length

Set a preference value for the static route. The smaller the number, the higher

the preference.

For example, specifying the same preference for multiple static routes to the

same destination enables load sharing on the routes. Specifying different

preferences enables route backup.

Enter the next hop IP address in dotted decimal notation.

Select the output interface.

You can select any available Layer 3 interface, for example, a virtual

interface, of the device. If you select NULL 0, the destination IP address is

unreachable.

Destination IP address and prefix length of the IPv6 route.

Protocol that discovered the IPv6 route.

Preference value for the IPv6 route.

The smaller the number, the higher the preference.

Next hop IP address of the IPv6 route.

Show Quick Links

Table of Contents