Ipv6 Traceroute Operation - HP 1910 User Manual

3. Enter the IPv4 address or host name of the destination device in the Destination IP address or host
name field.
4. Click Start to execute the traceroute command.
5. View the operation result in the Summary area.
Figure 314 IPv4 traceroute operation result

IPv6 traceroute operation

1. From the navigation tree, select Network > Diagnostic Tools.
2. Click the IPv6 Traceroute tab.
The IPv6 traceroute configuration page appears.
Figure 315 IPv6 traceroute configuration page
3. Enter the IPv6 address or host name of the destination device in the Destination IPv6 address or
host name field.
4. Click Start to execute the traceroute command.
345