HP 1910 User Manual page 272

Hp 1910 gigabit ethernet switch series

Hide thumbs Also See for 1910:

Table of Contents

Figure 225 Configuring the voice VLAN function on ports

Enable LLDP on ports GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2. Skip this step if LLDP is

enabled (the default).

Set both the LLDP operating mode and the CDP operating mode to TxRx on ports GigabitEthernet

1/0/1 and GigabitEthernet 1/0/2:

Select Network > LLDP from the navigation tree.

By default, the Port Setup tab is displayed.

Select port GigabitEthernet1/0/1 and GigabitEthernet1/0/2.

Click Modify Selected.

The page shown in

is displayed.

Show Quick Links

Table of Contents