Step
2.
Configuring MLD snooping in
a VLAN
3.
Configuring MLD snooping
port functions
4.
Displaying MLD snooping
multicast forwarding entries
Enabling MLD snooping globally
1.
Select Network > MLD snooping from the navigation tree.
2.
Click Enable for MLD snooping.
3.
Click Apply.
Figure 256 Enabling MLD snooping globally
Remarks
Required.
Enable MLD snooping in the VLAN and configure the MLD snooping
version and querier.
By default, MLD snooping is disabled in a VLAN.
IMPORTANT:
•
Enable MLD snooping globally before you enable it for a VLAN.
•
When you enable MLD snooping for a VLAN, this function takes effect
on the ports only in this VLAN.
Optional.
Configure the maximum number of IPv6 multicast groups allowed and
fast-leave processing on a port of the specified VLAN.
IMPORTANT:
•
Enable MLD snooping globally before you enable it on a port.
•
MLD snooping enabled on a port takes effect only after MLD
snooping is enabled for the VLAN.
Optional.
291