Configuring A Rule For A Basic Ipv4 Acl - HP 1910 User Manual

Figure 463 Adding an IPv4 ACL
3. Add an IPv4 ACL as described in
4. Click Apply.
Table 132 Configuration items
Item
ACL Number
Match Order

Configuring a rule for a basic IPv4 ACL

1. Select QoS > ACL IPv4 from the navigation tree.
2. Click the Basic Setup tab.
The rule configuration page for a basic IPv4 ACL appears.
Table 132.
Description
Set the number of the IPv4 ACL.
Set the match order of the ACL.
•
Config—Packets are compared against ACL rules in the order that the rules
are configured.
•
Auto—Packets are compared against ACL rules in the depth-first match order.
480