HP 1910 User Manual page 52

1. On the system parameter configuration page, click Next.
Figure 26 Management IP address configuration page
2. Configure the parameters as described in
Table 4 Configuration items
Item
Select VLAN Interface
Admin status
Description
Select a VLAN interface.
Available VLAN interfaces are those configured in the page that you enter by selecting
Network > VLAN Interface and selecting the Create tab.
The IP address of a VLAN interface can be used as the management IP address to
access the device. You can configure a VLAN interface and its IP address in the page
that you enter by selecting Network > VLAN Interface. For more information, see
"Configuring VLAN interfaces."
Enable or disable the VLAN interface.
When errors occurred in the VLAN interface, disable the interface and then enable the
port to bring the port to operate correctly.
By default, the VLAN interface is down if no Ethernet ports in the VLAN is up. The
VLAN is in the up state if one or more ports in the VLAN are up.
IMPORTANT:
Disabling or enabling the VLAN interface does not affect the status of the Ethernet ports
in the VLAN. That is, the port status does not change with the VLAN interface status.
39
Table 4.