HP 1910 User Manual page 147

Figure 118 Trap tab
3. Select Enable SNMP Trap.
4. Click Apply to enable the SNMP trap function.
5. Click Add.
The page for adding a target host of SNMP traps appears.
Figure 119 Adding a target host of SNMP traps
6. Configure the settings for the target host as described in
7. Click Apply.
Table 38 Configuration items
Item
Destination IP Address
Security Name
Description
Select the IPv4 or IPv6 option, and enter the specific type of destination IP address.
Set the security name, which can be an SNMPv1 community name, an SNMPv2c
community name, or an SNMPv3 user name.
134
Table 38.