HP 1910 User Manual page 259

Table 79 Field description
Field
Chassis type
Port ID type
Port ID
System capabilities supported
System capabilities enabled
Auto-negotiation supported
Auto-negotiation enabled
OperMau
Power type
Power source
Description
Chassis ID representation:
•
Chassis component.
•
Interface alias.
•
Port component.
•
MAC address.
•
Network address.
•
Interface name.
•
Locally assigned—Locally-defined chassis type other than those listed
above.
Port ID representation:
•
Interface alias.
•
Port component.
•
MAC address.
•
Network address.
•
Interface name.
•
Agent circuit ID.
•
Locally assigned—Locally-defined port ID type other than those listed
above.
The port ID value.
The primary network function of the system:
•
Repeater.
•
Bridge.
•
Router.
The network function enabled on the system:
•
Repeater.
•
Bridge.
•
Router.
The support of the neighbor for auto negotiation.
The enable status of auto negotiation on the neighbor.
Current speed and duplex mode of the neighbor.
Power type:
•
Type 1 PD—This type requires power from 0 to 15.4 W, a voltage
from 44 to 57 V, and a maximum current of 350 mA.
•
Type 2 PD—This type requires power from 0 to 30 W, a voltage from
50 to 57 V, and a maximum current of 600 mA.
Power supply type for a PD:
•
Unknown—Unknown power supply.
•
PSE—PSE power supply.
•
Local—Local power supply.
•
PSE and local—PSE and local power supply.
246