HP 1910 User Manual page 449

Figure 418 RADIUS Setup page
2. Configure the RADIUS communication parameters as described in
3. Click Apply.
Table 119 Configuration items
Item
Server Type
Authentication Server Shared Key
Confirm Authentication Shared Key
Accounting Server Shared Key
Confirm Accounting Shared Key
Description
Specify the type of the RADIUS server supported by the switch,
including:
•
Extended—Specifies an extended RADIUS server (offered by
IMC). The RADIUS client and RADIUS server communicate using
the proprietary RADIUS protocol and packet format.
•
Standard—Specifies a standard RADIUS server. The RADIUS
client and RADIUS server communicate using the standard
RADIUS protocol and packet format defined in RFC 2138/2139 or
later.
Specify and confirm the shared key for the authentication server.
These two parameters must have the same values.
Specify and confirm the shared key for the accounting server. These
two parameters must have the same values.
436
Table 119.