Enabling Lldp On Ports - HP 1910 User Manual

Step
2. Setting LLDP parameters on
ports
3. Configuring LLDP globally
4. Displaying LLDP information
for a port
5. Displaying global LLDP
information
6. Displaying LLDP information
received from LLDP neighbors

Enabling LLDP on ports

1. Select Network > LLDP from the navigation tree.
By default, the Port Setup tab is displayed, as shown in
status and operating mode of LLDP on a port.
2. Select one or more ports and click Enable beneath the port list to enable LLDP on them.
To disable LLDP on a port, select the port and click Disable.
Remarks
(Optional.)
LLDP settings include LLDP operating mode, packet encapsulation, CDP
compatibility, device information polling, trapping, and advertisable
TLVs.
The default settings are as follows:
•
The LLDP operating mode is TxRx.
•
The encapsulation format is Ethernet II.
•
CDP compatibility is disabled.
•
Device information polling and trapping are disabled.
•
All TLVs except the Location Identification TLV are advertised.
(Required.)
By default, global LLDP is disabled.
To enable LLDP to work on a port, enable LLDP both globally and on the
port.
(Optional.)
You can display the local LLDP information, neighbor information,
statistics, and status information of a port, where
•
The local LLDP information refers to the TLVs to be advertised by the
local device to neighbors.
•
The neighbor information refers to the TLVs received from neighbors.
(Optional.)
You can display the local global LLDP information and statistics.
(Optional.)
You can display the LLDP information received from LLDP neighbors.
236
Figure 204. This tab displays the enabling