HP 1910 User Manual page 459

Figure 429 Local user configuration page
3. Configure the local user as described in
4. Click Apply.
Table 121 Configuration items
Item
Username
Password
Confirm
Group
Password Encryption
Service-type
Expire-time
Level
Description
Specify a name for the local user.
Specify and confirm the password of the local user. The settings of these two fields must
be the same.
IMPORTANT:
Do not specify a password starting with spaces, because the spaces will be ignored.
Select a user group for the local user.
For information about user group configuration, see
Select a password encryption method: Reversible or Irreversible.
Select the service types for the local user to use: FTP, Telnet, Portal, LAN-Access, SSH,
or WEB. The LAN-Access service primarily represents Ethernet users, such as 802.1X
users.
The switch series does not support PPP.
IMPORTANT:
If you do not specify any service type for a user who uses local authentication, the user
cannot pass authentication.
Specify an expiration time for the local user, in the HH:MM:SS-YYYY/MM/DD format.
When the NAS authenticates a local user with the expiration time argument
configured, it checks whether the expiration time has elapsed. If the expiration time is
not expired, the NAS permits the user to log in.
Select an authorization level for the local user: Visitor, Monitor, Configure, or
Management, in ascending order of priority.
This option takes effect on only FTP, Telnet, and SSH users.
446
Table 121.
"Configuring a user group."