HP 1910 User Manual page 176

Figure 151 Creating a VLAN interface
3. Configure the VLAN interface as described in
4. Click Apply.
Table 43 Configuration items
Item
Input a VLAN ID:
DHCP
BOOTP
Configure
Manual
Primary
IPv4
IPv4
Address
Address
Mask
Length
Description
Enter the ID of the VLAN interface to be created. Before creating a VLAN interface,
make sure that the corresponding VLAN exists.
Configure the way in which the VLAN interface gets an IPv4 address.
Allow the VLAN interface to obtain an IP address automatically by
selecting the DHCP or BOOTP option, or manually assign the VLAN
interface an IP address by selecting the Manual option.
Configure an IPv4 address for the VLAN interface.
This field is available after you select the Manual option.
Set the subnet mask length (or enter a mask in dotted decimal
notation format).
This field is available after you select the Manual option.
163
Table 43.
These items
are available
after you
select the
Configure
Primary IPv4
Address box.