Configuring Users And User Groups; Overview; Configuring A Local User - HP 1910 User Manual

Configuring users and user groups

Overview

You can configure local users and create groups to manage users on the switch series.
A local user represents a set of user attributes configured on a switch (such as the user password, use type,
service type, and authorization attribute), and is uniquely identified by the username. For a user
requesting a network service to pass local authentication, you must add an entry as required in the local
user database of the switch. For more information about local authentication, see
A user group consists of a group of local users and has a set of local user attributes. You can configure
local user attributes for a user group to implement centralized management of user attributes for the local
users in the group. All local users in a user group inherit the user attributes of the group, but if you
configure user attributes for a local user, the settings of the local user take precedence over the settings
for the user group.
By default, every newly added local user belongs to a user group named system, which is automatically
created by the system.

Configuring a local user

1. Select Authentication > Users from the navigation tree to enter the Local User tab, which displays
all local users.
Figure 428 Local user list
2. Click Add.
The page for adding a local user appears.
445
"Configuring AAA."