Igmp Snooping Configuration Example - HP 1910 User Manual

Figure 246 Displaying detailed information about the entry
Table 86 Field description
Field
VLAN ID
Source Address
Group Address
Router Port(s)
Member Port(s)

IGMP snooping configuration example

Network requirements
As shown in
as the IGMP querier.
Perform the configuration so that Host A can receive the multicast data destined for the multicast group
224.1.1.1, and Switch A drops the unknown multicast data rather than flooding it in the VLAN.
Figure 247 Network diagram
1.1.1.1/24
1.1.1.2/24
Source
Description
ID of the VLAN to which the entry belongs.
Multicast source address. If no multicast sources are specified, this field
displays 0.0.0.0.
Multicast group address.
All router ports.
All member ports.
Figure 247, IGMPv2 runs on Router A and IGMPv2 snooping runs on Switch A. Router A acts
Eth1/2 Eth1/1
10.1.1.1/24
Router A
IGMP querier
Host B
GE1/0/2
GE1/0/1 GE1/0/3
Switch A
282
VLAN 100
Host A
Receiver