Adding A Policy - HP 1910 User Manual

Item
Remark
Filter

Adding a policy

1. Select QoS > QoS Policy from the navigation tree.
2. Click the Add tab to enter the page for adding a policy, as shown in
Figure 487 Adding a policy
3. Add a policy as described in
IP Precedence
Dot1p
Local Precedence
DSCP
Table
Description
Configure the action of marking IP precedence for packets.
Select the IP Precedence box and then select the IP precedence
value to be marked for packets in the following list. Select Not Set to
cancel the action of marking IP precedence.
Configure the action of marking 802.1p priority for packets.
Select the Dot1p box and then select the 802.1p priority value to be
marked for packets in the following list. Select Not Set to cancel the
action of marking 802.1p priority.
Configure the action of marking local precedence for packets.
Select the Local Precedence box and then select the local
precedence value to be marked for packets in the following list.
Select Not Set to cancel the action of marking local precedence.
Configure the action of marking DSCP value for packets.
Select the DSCP box and then select the DSCP value to be marked
for packets in the following list. Select Not Set to cancel the action
of marking DSCP value.
Configure the packet filtering action.
After selecting the Filter box, select one item in the following list:
•
Permit—Forwards the packet.
•
Deny—Drops the packet.
•
Not Set—Cancels the packet filtering action.
150.
510
Figure 487.